Showing all 13 results
Conplast CN admixture is based on calcium nitrite. It is supplied as a pale straw coloured solution that instantly disperses in water. The product has been neutralised for good slump retention. (Corrosion inhibitor) Size: 5 Gal Technical Data Datasheet
CONPLAST RP264 produces increased workability concrete, with increased cohesion and set-retardation. Produces increased workability without loss of strength, increased strength without loss of workability, or cement reduction without loss of workability or strength. Size: 5 Gal Technical Data Datasheet
Conplast UW underwater concrete admixture is a chloride free blend of selected polymers supplied as a fine brown powder. When added to concrete, Conplast UW produces a gel in the water phase which surrounds the cement particles and other fine components of the concrete mix and protects them from excessive washout both during placement and…
Conplast WP402 is designed for use as an integral water resisting admixture for ready mixed concrete. It is based on a unique blend of fatty acid salts and hydrophobic materials, supplied as a white chloride-free liquid. Hydrophobic, poreblocking, concrete admixture – Production of water resistant concrete and Concrete for liquid retaining / excluding structures. Size:…
DYNAplas PC 5-21 is a new generation High Range Water Reducing Admixture, based on polycarboxylate Polymer technology. PC 5-21 is specially formulated to be a robust yet versatile admixture that will meet the exacting demands of most concrete requirements. Size: 210 L Technical Data Datasheet
Dyanplas R 350BD is an aqueous solution formulated to improve the workability and to temporarily stop the hydration of cementitious mixtures. DYNAplas R 350BD can be dispensed directly to mortar and concrete mixtures, and is formulated to conform to ASTM C494 Type B and D. Size: 1000L Tote Technical Data Datasheet
SikaFiber® Novomesh®-950 is an engineered blend of macro and micro synthetic reinforcing fibers specifically designed for the reinforcement of concrete. SikaFiber® Novomesh®-950 is 100% virgin copolymer polypropylene macro and micro fibers deisgned to provide the optimum combination of plastic shrinkage and long term reinforcement within the concrete. Specifically engineered and manufactured in an ISO 9001…
PAREX® 121 Dry Basecoat & Adhesive is a dry mix adhesive and basecoat for Parex EIFS Systems. It can be used as an adhesive to adhere EPS to substrates listed below and applied without the addition of portland cement. Size: 50lbs Bag Technical Data Datasheet
A surface-applied, integral crystalline waterproofing material, PENETRON is used for waterproofing and chemical protection at both above and below ground level. PENETRON is applied by brush or spray to either the positive or the negative side of the concrete and in the presence of moisture penetrates deeply into the structure. The ensuing chemical reaction fills…
PENETRON ADMIX SB is identical to our 3rd generation crystalline admixture, but packaged in convenient, pre-measured soluble bags for easy application when adding the product to the new concrete batch. As a quality guarantee, PENETRON ADMIX SB features our unique ‘green tracer’ indicator to signal that genuine PENETRON ADMIX is in the mix. Technical Data Datasheet
Used in combination with PENETRON for filling non-moving cracks and construction joints, form-tie holes, honeycombed areas and structurally damaged concrete. PENECRETE MORTAR consists of Portland cement, very fine treated silica sand and various active, proprietary chemicals. It is applied in laminated layers to areas that have been opened and cut-back to sound concrete for repair…
Multimesh are 8 denier, mono-filament nylon fibers for use in creating fiber-reinforced concrete (FRC). The primary benefits of Multimesh are controlling plastic shrinkage,thermal, and craze cracking in concrete. Meets the requirements of ASTM C-1116, Section 4.1.3 and AC-32 at 1.5 lb (0.68 kg) per CY. Multimesh has completed ICC-ES evaluation as reported in ER 5460. Size: 40 Bags in a…
Control products are 8 denier, mono-filament nylon fibers for use in creating fiber-reinforced concrete (FRC). Control products primary advantages include controlling plastic shrinkage, thermal, and craze cracking in concrete. These fibers are packaged for retail sale and pre-measured ready-to-mix with a 50lb. bag of concrete. Meets the requirements of ASTM C-1116, Section 4.1.3 and AC-32 at 1.0 lb (0.45 kg)…
