Showing 17–32 of 80 results
Chemically neutralizes unpleasant odors. Use as a space spray to eliminate odors in the air. Non-staining formula. Non-flammable and biodegradable. Use as a surface spray to eliminate odors on tile, porcelain, formica and other washable surfaces. Add to a solution, such as mop water and hot water extraction tanks, to eliminate odors in the air,…
Galvafroid zinc rich cold galvanising coating is formulated as an easily applied protection against corrosion on all ferrous metals. Galvafroid has a mid-grey, matt finish. Size: 1.9 L Technical Data Datasheet
Galvashield® XP anode series, the original embedded galvanic anode for concrete repair, are used to mitigate ring anode corrosion or the halo effect when repairing reinforced concrete. Designed for optimum performance and ease of installation, the alkali-activated (Type 1A) anodes are comprised of high purity zinc cast around a steel tie wire with an enhanced formulated…
Kicker is a unique formulation of bio-degradable detergents and penetrants, specially designed to remove edible grease deposits from kitchen working surfaces, such as ovens, kitchen ranges, filters, fryers etc. Size: 1& 4 L Technical Data Datasheet
KONKLEEN is a combination of acid based material, corrosion inhibitors and dispersing agents. It is used for the removal of mortar and plaster runs, droppings and stains from brickwork and concrete surfaces. Also used for the removal of hardened concrete from tools and equipment or rust and mill scale from steelwork and for cleaning concrete…
KOOL-ROD is a closed cell, polyethylene, flexible, rope-like foam joint backing material. This material is virtually non-absorbent and chemically inert to most solvents. KOOL-ROD will not stain or adhere to sealant materials. It is fully compatible with acrylic, butyl, polyurethane, polysulfide, silicone, and most other cold-applied sealant compounds. KOOL-ROD is specifically designed as a compressible…
LIQUI-HARD ULTRA concrete densifier and chemical hardener is a waterborne, lithium-silicate-based, ready-to-use, colorless liquid, which hardens and dustproofs concrete at a molecular level. After proper application, the finished surface offers substantial improvement in abrasion and chemical resistance and will significantly improve the durability of the surface when compared to untreated concrete. As LIQUI-HARD ULTRA is…
MED-CURE is a ready-to-use, water-based, VOC-compliant concrete curing agent, hardener, and dustproofer. It is residue-free and contains no wax, resin, or other materials that would inhibit the bond of subsequent coatings and/or treatments over substrates treated with MED-CURE. USES MED-CURE is ideal as a curing aid as well as for hardening and dustproofing exposed concrete…
NITOPROOF 30 HL is a rubber reinforced bitumen emulsion. It provides a highly effective waterproof membrane and can be used in a wide range of applications, such as providing a damp proof membrane in ‘sandwich construction’; dual purpose waterproofer and curing compound. Size: 5 Gal Technical Data Datasheet
SikaFiber® Novomesh®-950 is an engineered blend of macro and micro synthetic reinforcing fibers specifically designed for the reinforcement of concrete. SikaFiber® Novomesh®-950 is 100% virgin copolymer polypropylene macro and micro fibers deisgned to provide the optimum combination of plastic shrinkage and long term reinforcement within the concrete. Specifically engineered and manufactured in an ISO 9001…
SCL One Step is an economical, durable, high-gloss and convenient “all in one” sealer and polish system for vinyl, terrazzo, linoleum, unglazed ceramic tiles, concrete tiles etc. Size: 1& 4 L Technical Data Datasheet
PAREX® 121 Dry Basecoat & Adhesive is a dry mix adhesive and basecoat for Parex EIFS Systems. It can be used as an adhesive to adhere EPS to substrates listed below and applied without the addition of portland cement. Size: 50lbs Bag Technical Data Datasheet
A green coloured glass fibre mesh fabric combined with specially designed surface treatments that can be used in a wide range of PAREXTHERM and PAREXDIRECT render applications. For ease of identification the 355 AVU mesh is coloured green and has the ‘PAREX’ name and logo throughout the mesh. Size: 50 m roll Technical Data Datasheet
Penebar NS- is a unique butyl-rubber-based preformed flexible sealing compound. It is designed to seal as a flexible non-swelling gasket to all types of precast structures. Size: 6 rolls, 27mm x 32mm x 3.5m each Technical Data Datasheet
PENEBAR SW 55 creates a physical barrier against water penetration through cast-in-place concrete joints that expand (in a controlled fashion) when exposed to water.Its superior ability to expand and seal concrete joints allows it to replace the more passive tied in PVC water stop systems, which easily bend over during casting, and eliminate welding irons,…
A rapid-setting, crystalline-based, cementitious compound designed to stopping active leaks even under high hydrostatic pressure. PENEPLUG is recommended as a waterproof plugging mortar or where rapid-setting is required. Size: 55 lbs Technical Data Datasheet
